Economic, effective, ecological, biodegradable
Our materials are designed for interior and exterior use, as a base/basic plaster or as final plasters. It serves as a remediation and at the same time as a highly effective thermal insulation measures of buildings. You can use them for almost all surfaces in the construction industry, including glass and metal. They are resistant to mold (ph> 10), you do not need to use additional protection. Exceptional speed of construction work and shortening of technological breaks is also important. After the plastering is applied under appropriate climatic conditions, the SATSYS system is functional in 2 days and is ready for the final finish. For the final plaster treatment, silicone and silicate colors and final silicate breed Dufa and Meffert). Removal of long technological breaks necessary for maturing the underlying layers of plasters, which are the disadvantage of conventional plaster and remediation systems and mostly last from 14 to 41 days are the advantage that every builder and implementing company appreciate in terms of construction economy.The material has the remediation properties multiply than that are prescribed for conventional remediation plasterings (strength, porosity). Insulates against water, heat, noise and fire (class A1)Compared to conventional insulating materials, it is solid and durable.
ThermoUm
Thermal insulation remediation plastering recommended for new buildings.
ThermoIn
Final stucco thermal insulation remediation plaster.
ThermoSan
Sano -thermal insulation core plastering designed primarily for remediation.
Technical propperties
Density of wet mixture: 400 kg/m3
Water vapor permeability μ <9.4
Pressure strength: 1.60 MPa
Porosity hardened mortar> 70%
Thermal conductivity coefficient λ: 0.09 W/MK
Building material DIN 4102
Building material A1 Dry plaster mixture, 1 package 7 kg.
Removal properties - correspond to WTA, single -layer processing without the need for spikes. For indoor and outdoor use.
One package 7kg (Thermoum, Thermosan) = 1m2 in a layer of 2cm
Grain size up to 2 mm
High resistance to cracks
A large pore volume> 70%
Excellent adhesion
Becomes fast hydrophobic
Excellent salt resistance
White color
Ingredients: lime hydrate, white cement / pucolaned binders, special Poraver filler, modifying ingredients.
Preparation of project, application and support
Stir the 7kg bag in a number of 3 liters of water, at a speed of 500otm.
Let it stand for 2 minutes and then supply 2-3 dcl of water as needed and
then mix for two minutes. Then the material is ready for application. In
manual preparation of the project, we recommend mixing a maximum of 2
bags at once, for thorough mixing of all components contained in the
plaster mixture.
For machine plastering, it is necessary to correctly
set the water column as well as the application pressure processed
mixture in a particular type of plastering machine.Application: We always apply to a dust -free and stained substrate.
Depending on weather conditions, at high plastering temperatures or
strong winds, it is necessary to supplement the necessary amount of
water for the correct consistency of the applied material.
The plaster
is stretched with the help of a stainless steel trowel/burner, the surface
treatment/annoying is carried out with a plastic trowel.
We provide technical support, advice and sharing the experience gained over the course of 15 years on the market and in the implementation of orders. If necessary, please contact us, we will be happy to provide you with the necessary information.